Would you like to make this site your homepage? It's fast and easy...
Yes, Please make this my home page!
Conductive Epoxy
This is a very simple trick which you can use if you run out of solder
or you find some other use for it. For this, you can iether use graphite
shavings or any other form of conductive metal shavings.
1. Get some metal shavings.
2. Mix the epoxy for a couple seconds.
3. Put a nice, thick amount of metal shavings on the epoxy. (Use enough to make it conductive.)
4. Continue to mix for a little longer then what the instructions say.
5. Use epoxy on any metal joints that need to be conductive.
